how to fix a head gasket

The head gasket plays a critical role in an engine's combustion process. When this vital part turns faulty, expensive repair bills are sure to follow.

But is a failed head gasket the death sentence for your car that many claim it is?

Read our Q&A to better understand this vital part of your engine and perhaps prevent future problems.

What is a head gasket? What does a head gasket do?

head-gasket-failure-fix-part

The head gasket seals the internal combustion process and keeps coolant and oil from mixing together.

It's found between the cylinder head at the top of the engine and the block, the main structure of the engine.

It's the most stressed gasket in the engine because unlike any other, it simultaneously seals oil, coolant and compression from the cylinders.

The head gasket seals oilways between the cylinder head and block allowing oil to circulate freely around the engine. It does the same with waterways, so coolant can travel where it's needed.

How does a head gasket become faulty?

Diagnosing problems in the head gasket can be difficult as it sits largely out of sight in an assembled engine.

A perforation to your gasket, or a dreaded blown head gasket, usually occurs through overheating.

However, pre-ignition trouble could see fuel combusted at the wrong time, sending large amounts of pressure into the cylinder head and causing perforations further down the line.

A bad head gasket or one that isn't installed properly is also likely to blow further down the line. It's important that head bolts are turned so they're not too loose to form a seal and not too tight, crushing the gasket and preventing a seal to form.

What are the signs that a head gasket has become faulty?

The most common signs that your head gasket is faulty include:

White or milky oil: When coolant seeps into the oil and the two mix, a milky white liquid can be seen on the dipstick or around the engine's oil filler cap
White exhaust smoke: When coolant flows into the combustion chamber it burns/evaporates as white smoke
Loss of power: A perforation to the gasket will cause pressure in the combustion chamber to decrease along with your engine power
Water or sweet smell from exhaust: This can occur as a result of leaks in the combustion system
Overheating engine: If the head gasket leaks coolant your engine becomes susceptible to overheating

Find out what to do with an overheating car.

33% off Breakdown Cover

You can get covered in our Breakdown Cover sale from just £6.35 a month.* Join the UK's best breakdown provider as voted by Auto Express drivers 2021.

33% off Breakdown Cover

How much does it cost to repair a blown head gasket?

head-gasket-failure-fix-garage

This varies widely depending on your car and garage, but it can cost anywhere from £500-£1000. Leaving a faulty head gasket unrepaired can result in further engine damage.

Warped cylinder heads usually occur when the head gasket fails to provide a seal and the cooling system fails. These tend to cost over £900 to repair.

Find a garage

What is head gasket sealer? How much does it cost?

How does head gasket sealer work? How do I use it?

Head gasket sealer is poured into the radiator and once hot enough, fills cracks and perforations. Running the car for about 15 to 30 minutes with the heater and fan on high helps trigger the sealer.

Many people are sceptical about the long-term powers of a chemical when fixing a mechanical fault, and a sealer should only ever be used as a temporary fix.

Can I drive with a blown head gasket?

While it's possible to drive with a blown head gasket it certainly isn't recommended. Once the seal is blown, pressure in the combustion chamber is lost and you'll feel a significant loss of power.

If your blown head gasket is causing coolant to leak, your engine is far more likely to overheat. This will incur further cracking and damage to your engine.

If motor oil mixes with coolant it becomes diluted and doesn't offer the same level of lubrication, this could lead to irreparable damage.

Car playing up?

Get quality repairs at a fair price, plus a 12 month warranty with RAC Approved Garages.

Car playing up?

How to prevent a blown head gasket

Head gasket failures are usually the result of engine overheating, so ensure coolant is topped up and the coolant system is in good working condition, with no leaks and an efficient radiator.

A properly-installed head gasket will also prevent future damage. Ensure you use bolts that are in good condition and are suitably tightened. Too loose and a seal won't form, too tight and you risk crushing the gasket.

It's always important to use sealers as directed on the packaging - or to find a reliable garage to get a mechanic to do it for you.

Find a garage

Is a blown head gasket the end of my car?

Book a car service today

It's easy to book a service online at one of our local approved garages. Find a trusted local garage with the RAC stamp of approval.

Book a car service today

*For new, single vehicle based cover. Standard monthly cover on a fixed 12 month plan from £6.35 a month. Ends 10/11/21, 7am.